Προϊόντα

MSI MPG GUNGNIR 300P AIRFLOW Windowed Mid-Tower Case Tempered Glass - Black

Μικρή διαθεσιμότητα
175,00 €
Χωρίς ΦΠΑ: 141,13 €
Πληροφορίες
Κωδικός Msystems: 001-66411
Part Number: 306-7G21P21-W57
Εγγύηση: 2 Έτη

Παρακαλώ συμπληρώστε τον ΤΚ σας
Παρακαλώ επιλέξτε νομό
Παρακαλώ επιλέξτε πόλη

Με πιστωτική κάρτα Visa, Mastercard, American Express, Diners
Παρακάτω βλέπετε τις επιλογές για τις έντοκες δόσεις. για άτοκες δόσεις πρέπει το συνολικό ποσό της παραγγελίας σας να ξεπερνά τα 200€
90,47 € / δόση = 180,93
60,59 € / δόση = 181,76
45,64 € / δόση = 182,56
36,67 € / δόση = 183,37
30,70 € / δόση = 184,19
26,43 € / δόση = 185,01
23,23 € / δόση = 185,83
20,74 € / δόση = 186,66
18,75 € / δόση = 187,48
17,12 € / δόση = 188,32
15,76 € / δόση = 189,16
14,62 € / δόση = 190,00
13,63 € / δόση = 190,84
12,78 € / δόση = 191,68
12,03 € / δόση = 192,54
11,38 € / δόση = 193,39
10,79 € / δόση = 194,25
10,27 € / δόση = 195,11
9,80 € / δόση = 195,98
9,37 € / δόση = 196,84
8,99 € / δόση = 197,72
8,63 € / δόση = 198,59
8,31 € / δόση = 199,47
8,01 € / δόση = 200,36
7,74 € / δόση = 201,23
7,49 € / δόση = 202,13
7,25 € / δόση = 203,02
7,03 € / δόση = 203,93
6,83 € / δόση = 204,82
6,64 € / δόση = 205,73
6,46 € / δόση = 206,64
6,29 € / δόση = 207,55
6,13 € / δόση = 208,46
5,98 € / δόση = 209,39
5,84 € / δόση = 210,32

Buy Now - Pay Later μέσω tbi bank
Πραγματοποιήστε τις αγορές σας, για ποσά από 20€ έως 400€, σε 4 μηνιαίες δόσεις με την χρήση μόνο της χρεωστικής σας κάρτας
Facebook Twitter Email
Facebook Twitter Email
Περιγραφή

AN ETERNITY OF EXCELLENCE

MPG GUNGNIR 300P AIRFLOW

  • One-piece 1mm perforated front panel, supporting dual 360mm AIO liquid cooler at front/top and push-pull setup.
  • Optimzed the airflow and enhance the airflow for M.2 SSD.
  • Fully support high-end graphics card no matter vertical or horizontal installation and also reserves enough space to ensure cooling and cable bending.
  • Omnidirectional graphics card stand can adjust in many ways to support different graphics card installation.
  • Patented DIY friendly design for easy to assemble.
  • 4 x 120mm, 1 x 80mm, 2 x 60mm PWM fans and PCIe 4.0 riser cable pre-installed.
  • E-ATX (280 x 305 mm), ATX, Micro-ATX and Mini-ITX motherboard & 360 mm GPU capacity.
  • 1 x USB 3.2 Gen 2x2 Type-C port (20Gbps) & 2 x USB 3.2 Gen 1 Type-A ports (5Gbps).

DESIGN STORY

Many PC cases have already been introduced to MSI’s GUNGNIR product series. The GUNGNIR product series consists of many products, each with different looks and selling points. After introducing the GUNGNIR series to the market for so long, we are proud to present the latest member of our popular product series, the MPG GUNGNIR 300 series, designed to meet the evolving needs of our customers in this ever-changing world.

POTENTIAL FOR COOLING

  • Supports 360mm radiators at the front and top simultaneously.
  • Up to 10 fans simultaneously.
  • Reserve 80 mm at the top and front to support Push-Pull cooling layout.

Optimized AirFlow Possibility

The front panel features perforated mesh, compared to the typical mesh, which can filter out most dust. While the side panel and PSU shroud both have vents for airflow. If using the fans Push-Pull configuration, this case can install up to 10 fans for maximum cooling.

 

Enhance the airflow for M.2 SSD

When the graphics card is vertically installed, adding three small fans can effectively enhance the airflow between the graphics card backplate and the motherboard, assisting in SSD cooling to prevent any speed throttling during data transmission.

LARGE SPACE FROM SIDE PANELS

The MPG GUNGNIR 300P AIRFLOW making it ideal for vertical graphics card installation. (allows for vertical installation of up to four PCIe slots). This case not only ensures sufficient room for the graphics card's fan to intake and dissipate air effectively through the side panel, but it also maintains ample space between the graphics card and the motherboard.

OMNIDIRECTIONAL GRAPHICS CARD STAND

The graphics card stand can be easily adjusted for different graphics card sizes and installation methods without the need for any tools, making it a diy-friendly design that allows for changing the optimal support position effortlessly.

Τεχνικά Χαρακτηριστικά
ΚατασκευαστήςMSI
ΜοντέλοMPG GUNGNIR 300P AIRFLOW Windowed Mid-Tower Case Tempered Glass - Black
Part Number306-7G21P21-W57
ΚατηγορίαΚουτιά
Μέγεθος μητρικήςMini-ITX
Micro ATX
ATX
E-ATX (up to 280 x 305 mm)
ΜέγεθοςMidi Tower
TροφοδοτικόΧωρίς Τροφοδοτικό
Εσωτερικές Θέσεις6x 2.5"
2x 2.5"/3.5" combo
Front Panel I/Os2x USB 3.2 Gen 1
1x USB 3.2 Gen 2 Type-C (Gen 2x2)
Mic IN
Headphones OUT
ΧρώμαBlack
Λοιπά στοιχείαExpansion Slots: 7
Dimensions (DxWxH): 505 x 235 x 510 mm
Net Weight: 10.9 kg

Fan Support
Top: 3x 120 mm/ 2x 140 mm
Front: 3x 120 mm/ 3x 140 mm
Rear: 1x 120 mm/ 1x 140 mm
Pre-installed Fans
Front: 3 x 120mm PWM BLACK Fans
Rear: 1 x 120mm PWM BLACK Fan

Radiator Support
Top: 120/ 140/ 240/ 280/ 360 mm
Front: 120/ 140/ 240/ 280/ 360 mm
Rear: 120/ 140 mm

Clearance
Maximum GPU Length: 360 mm
Maximum CPU Cooler Height: 175 mm
Power Supply Support: ATX (220mm length)
Εγγύηση2 Έτη
αξιολογήσεις χρηστών
Powered by

Δεν υπάρχουν αξιολογήσεις

Φόρμα Ερωτήσεων σχετικά με το προϊόν
Συμπληρώστε στην παρακάτω φόρμα τα στοιχεία σας και θα επικοινωνήσουμε μαζί σας για να σας βοηθήσουμε σχετικά με αυτό το προϊόν.
Η παρούσα φόρμα δεν αποτελεί παραγγελία.

Τα παρακάτω στοιχεία χρησιμοποιούνται από την εταιρεία Msystems ΙΚΕ με οποιονδήποτε τρόπο αποκλειστικά και μόνο για την απάντηση του αιτήματός σας.